Previous photo Next photo Thumbnail page
ExhibitPlus HM-rear-mount_6 The replacement transmission mount went into place quite easily.  The original lower right bolt into the bell collar would not grab with the mount in place (the threads in the hole were stripped).  Luckily, a 1/2
The replacement transmission mount went into place quite easily. The original lower right bolt into the bell collar would not grab with the mount in place (the threads in the hole were stripped). Luckily, a 1/2" longer bolt found enough threads to grab; and, the hole was almost deep enough to allow the bolt to tighten (I used 2 flat washers as outer spacers).

HM-rear-mount_1 HM-rear-mount_2 HM-rear-mount_3 HM-rear-mount_4 HM-rear-mount_5 HM-rear-mount_6 HM-rear-mount_7 HM-rear-mount_8
First page Previous page Index page Next page Last page